Search
Close this search box.

PREMIUM Toolox 33

AISI / SAE Toolox 33

Toolox 33

PREMIUM Toolox 33

Toolox 33
€co-Präz®
-flat-
Logo_Abrams_Ausrufezeichen.png
MAXIMUM FLEXIBILITY – THAT IS OUR €co-Präz®!
richtwerte-2.png

Standard values

Chemical designation: Toolox 33
Working hardness without nitriding: approx. 30-36 HRC (delivery condition)
Delivery condition: maximum 330 HB
Chemical composition:
C Si Mn P S Cr Mo Ni V
0,22

0,24
0,6

1,1
0,8

0,8
0

0,01
0

0,003
1,0

1,2
0,3

0,3
0

1,0
0,1

0,11
technical-info.png

Technical properties

Quenched and tempered low alloy toolsteel with good machinability, high toughness and low residual stresses. Can easily be polished, grained, eroded, etched, sliced, welded, nitrided, and coated with PVD (Physical Vapour Deposition). Further heat treatment is not intended.

anwendungen.png

Applications

Mechanical engineering, machine parts, guide rails, base plates, assembling parts, press brake tools, plate forming tools, wear parts, plastic moulds, moulding frames, forming tools, rubber moulds, die casting moulds.

70 STEEL GRADES IN 33.895 DIMENSIONS

EX WORKS FROM OSNABRÜCK

DELIVERY IN 3-5 WORKING DAYS (SUBJECT TO AVAILABILITY)

WITHOUT MINIMUM ORDER VALUE OR QUANTITY

FROM EUROPE'S LARGEST RANGE OF SEMI-FINISHED PRODUCTS

SPECIAL CUSTOM DIMENSIONS SAWN - MILLED - GROUND

Select Your Country / Language

Do you have any questions?

If you have any comments or questions regarding ABRAMS PREMIUM STEEL® products or this website, please do not hesitate to contact us.

Please feel free to call us at any time:

+49 541/357 39-0

or send us an E-mail to:

[email protected]

If you have any comments or questions regarding ABRAMS PREMIUM STEEL® products or this website, please do not hesitate to contact us.

Please feel free to call us at any time: